We do not provide support or assistance with this router.
1. Connect your router to Phone Jack or DSL port in your wall via a Phone/DSL cable, This should go in the grey DSL port in the Router and should plug either directly into the wall or into the DSL port in a small filter device which will plug into the wall. Ensure nothing is plugged into the blue WAN port.
Once you get a solid WAN light you are ready to proceed with the next steps.
2. Log in to your HG659
Browse to the login page http://192.168.1.1
Username: Admin (Capital A is required)
Password: VF-NZhg659 or @ followed by the last 8 digits of the Serial Number for example @12345678
The password required will depend on the firmware version the router is running.
3. Click save in the box shown below.
4. Click Internet int he bar a the top.
5. Click "Edit" for the service in the list marked "internet_adsl" and enter the settings shown below ensuring all options match the screenshot below.
Connection Type: IP routing (PPP)
Link Mode: PPPoA
6. Click Save, Your router is now correctly configured.