Our High end routers are plug and play, however there may be times you will need to manually set them up.
To do so please follow the below simple steps.





Under Advanced/LAN/IPTV/Lan Port - ISP Profile (select Stuff Fibre from drop down)
You can manually configure all SSIDs, admin pw is the PIN on bottom of router and initial connection can be done via QR code on rear of router

To do a firmware update please download the Stuff Fibre Firmware below.
https://www.asuswebstorage.com/navigate/a/#/s/6F035336A0F14F65A400A62BEDE24D26Y
Please follow the instructions below on this article.
https://support.stuff-fibre.co.nz//hc/en-us/articles/360011390394-ASUS-Firmware-updates