Fritzbox Fibre

We do not provide support or assistance with this router.

1. Connect your router to the ONT (Fibre device on your wall) via an  Ethernet cable, This should go in the Blue WAN port or Yellow LAN1 port if you don't have a WAN port in the Router and  will typically go in the GE1/LAN1 port in the ONT device although this  port may change depending on the number of services active at your  property. Ensure nothing is plugged into the grey DSL port in the router.

2. Log in to your Fritzbox

Browse to the login page http://192.168.78.1

Password: admin

(You may be presented with instructions to log in via an alternative method if this is your first time logging in)

3. Click "Internet" on the left hand side.

4. Click "Account Information" on the left hand side.

Enter the settings marked below:

Internet Service Provider: other internet service provider
Name: SF

Connect via: Connection to an external modem or router

Operating Mode: Establish own connection to the internet

Is account information required? No.

Scroll down to the page below.

Further settings:

Data throughput: Enter the speed of your ordered service, This typically won't impact performance if it's incorrect.

VLAN Settings: Ticked
VLAN-ID: 10

IP Settings: Obtain the IP address automatically (DHCP)

5. Click Apply, Your router is now correctly configured.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request